Configure controller on bus game download#

In Universal Split Screen, make sure the Hook XInput for gamepads option is selected, and that you setup the Controller index for each game instance. You need to copy-paste this dll several times and rename it to xinput1_4.dll, xinput1_2.dll, xinput1_1.dll and xinput9_1_0.dll

You will notice that x360ce has created xinput1_3.dll next to x360ce.exe.

Once you have finished, click Save and close x360ce.

Switch between controllers by clicking Controller 1/2/3/4 at the top.

If x360ce didn’t find a correct configuration for your controller, you can select in the dropdowns next to the button names, and press the button on your controller.

You should see corresponding buttons light up.

Try pressing buttons on your controllers.

You will be prompted to search the internet for configurations for your controllers.

Close the Warnings list by clicking Ignore All.

It will say ‘xinput1_3.dll’ was not found.Copy x360ce.exe from the x360ce directory to the game directory, then run it after plugging in your controllers.If it isn’t in the immediate directory, it is probably in a folder called bin/ win32/ win64 or similar. When your controller has enough battery life, you can disconnect the USB cable and use your controller wirelessly. After the light bar blinks, the player indicator lights up. If your controller is turned off, press the PS button.

Find the directory where the executable (exe) for the game is located. Connect the controller to your console using the included USB cable.For Steam games, right-click the game in Steam -> Properties -> Local files -> Browse local files… Extract the x360ce.zip anywhere by right-clicking -> Extract all….If in doubt, try 32-bit first, then try 64-bit if it doesn’t work. You will need x360ce.zip if you are playing a 32-bit game and x360ce_64.exe if it is 64-bit.I would recommend x360ce 3.X over 4.X as it has bindings for most controllers, and 4.X can duplicate the controller indexes.

Configure controller on bus game download#

Download x360ce 3.X from the GitHub releases.

This is useful if your controller doesn’t work out of the box with a game. To do this in Windows, go to Network & Internet settings and choose Change Adapter Options.X360ce can trick any game into thinking any controller is a standard xbox 360 controller. The Ethernet IP address on the computer has to be configured to a private network address with specific subnet - 192.168.3.x to communicate with the bus controller. You will also need a SSH client such as Putty ( ) installed on your computer. Connect a Ethernet cable from the debug port to a computer. If the appearance of RED LED is prolonged or intermittent, please contact our support team.įor more advanced diagnosis, there is a RJ45 debug port (circled in the diagram below) for diagnosis over SSH. This indicates a fault and a power reset should be attempted. Under no normal circumstances the LED should turn RED. This is normal as the GPS may struggle to acquire continuous signal especially in area surrounded by tall buildings. From time to time, the LED may switch back and forth between BLUE and PURPLE to indicate GPS signal reception. In this state, the GPS data is collected every 5 seconds. Once the Bus Controller GPS is satellite fixed, the LED indicator will turn BLUE. For best signal, position the GPS antenna near a window and do not place directly on metal surfaces. This will take some time (up to 30 minutes for first boot) depending on signal reception. When the LED light indicator turns to PURPLE from GREEN, this indicates that internet connection is established but GPS reception is not. It may take longer depending on signal reception and may not change color at all if the antenna is not fastened properly or if the GPS and 4G antenna is swapped. It will take at least 2 minutes to indicate BLUE or PURPLE once internet connection is established. This indicates that the bus controller is not yet connected to the internet through 4G. Under normal circumstances, the first color displayed is GREEN. The LED light indicator will turn on shortly after power on. The RGB LED light indicator can be used to diagnose the status of the bus controller. Smart Bus Controller Installation Guide.pdf